Product Parameters
Model | KHY 10000UP-48TX | KHY 12000UP-48TX |
Parallel mode (function reserved) | ||
Allow quantity | 1-6 | |
Mains mode | ||
Nominal input voltage | 120(L1/N,L2/N)/240Vac(L1/L2) | |
Input voltage range | (85Vac~140Vac)±2% | |
Frequency | 50Hz/60Hz(Auto detection) | |
Frequency range | 47±0.3Hz~55±0.3Hz(50Hz);57±0.3Hz~65±0.3Hz(60Hz); | |
Max.effciency | >95% | |
Conversion time(bypass and inverter) | 10ms(Typical value) | |
Max. bypass overload current | 2P,63A/63A(L1/L2) | |
Inverter mode | ||
Output voltage waveform | Pure sine wave | |
Rated output power (VA) | Split phase: 10000 | Split phase: 12000 |
Single phase: 7200(limited by the wiring teminals) | Single phase: 7200(limited by the wiring teminals) | |
Rated output power (W) | Split phase: 10000 | Split phase: 12000 |
Single phase: 7200(limited by the wiring teminals) | Single phase: 7200(limited by the wiring teminals) | |
Power factor | 1 | |
Nominal output voltage (Vac) | 120Vac (L1/N,L2/N)/240Vac(L1/L2) | |
Output frequency range(Hz) | 50Hz±0.3Hz/60Hz±0.3Hz | |
Max. Effciency | >91% | |
Overload protection | (102% < load <110%) ±5%: report error and turn off the output after 5 minutes; (110%< load < 125%)±5%: report error and turn off the output after 10 seconds; Load >125% ±5%: report error and turn off the output after 5 seconds; |
|
Peak power | Split phase: 15000VA Single phase: 15000VA | Split phase: 18000VA Single phase:18000VA |
Load motor capability | 5HP | 6HP |
Nominal battery input voltage | 51.2V (Minimum starting voltage 44V) | |
Battery voltage range | 40.0Vdc~58.6Vdc±0.6Vdc (Undervoltage alarm/shutdown voltage/overvoltage alarm/overvoltage recovery... settable on LCD screen) | |
Save power mode | Load≤25W enter power-saving mode | |
Mains charge | ||
Battery type | Lead acid or lithium battery | |
Max. charge current(configurable) | 120A | 160A |
Charge voltage range | 40 -58.6Vdc | |
Solar charge | ||
Max.PV open circuit voltage | 500Vdc | |
PV operate voltage range | 90Vdc~500vdc | |
MPPT voltage range | 80Vdc~450Vdc | |
Battery voltage ranget | 40-58.6Vdc | |
Max. PV input power | 5500Wx2 | 6000Wx2 |
Max. PV input current | 22A+22A | |
Charge current range(configurable) | 200A | 220A |
Max. hybrid charge current(PV+AC) | ||
Max. hybrid charge current (configurable) | 0-200A | 0-220A |
Certification | ||
Safety certification | UL STD 1741 | |
EMC certifcation level | Fcc part15,CLASS B | |
Operate temperature range | -10℃ to 55℃(>45℃ derating) | |
Storage temperature range | -25℃~60℃ | |
Humidity range | 5% to 95%(Three anti-paint protection) | |
Noise | ≤60dB | |
Cooling | Forced air cooling, adjustable wind speed | |
Communicate | USB/RS485(/IFI/GPRS) Dry node control | |
Dimensions(L*W*D) | 620mm*450mm*132mm | |
Weight (kg) | 23.8 |
Product About
It has the function ofsectional charge and discharge (can set the time period for battery charging ordischarging).
It can be used without battery, Solar and utility grid can powerloads at the sametime.
With dual activation function of lithium battery, lit can be trigpered by any power supply ofthe mains orsola(when the li-ion batterwas dormant)
Product Features
Powersaving mode available to reduce no-load loss.
Available in four charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging.
Two output modes: mains bypass and inverteroutput: Unintemupted powersupply.
Complete protections, including over voltage and under voltage protection, overload protection, reverse protection.etc,360° all-round protection with a numberofprotection functions.
With touch resistancel cp screen dynamic flow diagram design, easyto understand the system data and operation status
Allowing access oflead-acid batterand lithium batteny.
Anti feed-in, selfconsumption function (can be hvbrid powersupply from solar, battery and grid).
Appliration Scenarios
Simple - efficient - safe - reliable
Please Contact Us If You Have Any Questions.
The products produced by the company have been distributed in more than 20 provinces and cities across the country, and have been unanimously recognized and praised by customers.